• SubMiniature Pilot Valves

    10mm and 15mm Solenoid Pilot Valves

  • Custom Valves and Accessories

    Complete Assemblies for Plug-and-Play Solutions

Pilot Valves 10mm 15mm Solenoids The 10mm and 15mm direct acting and pilot valves are a further evolution of Solenoid Solution's solenoid valve offering manufactured for the pneumatic automation and instrumentation market.

The 10mm and 15mm solenoid valves are designed for those air and inert gas applications where high performance in the areas of pressure and flow are required together with small size, very low power consumption and high reliability even at high cycling rates. And all Solenoid Solutions 10mm and 15mm solenoid valves are suitable for oxygen service.

The 10mm and 15mm solenoid valves are made with an encapsulated coil joined to a valve body. The assembly is non-detachable.

All solenoid valves feature...

  • Heat-resistant bobbin molded with 30% glass filled Polyethylene
  • Class H copper wire
  • Encapsulation with high quality, specially designed glass filled polypropylene
  • Stainless steel plunger guide, plunger and valve core

The valve assembly is designed for more than 50 million cycles and is normally provided with Buna seals and a monostable manual override. Other seal materials are available as required. The valve is delivered with a specially designed seal and screws for assembly to a valve base or manifold.

The coil is designed and manufactured in accordance with EN60204.1 and is suitable for industrial ambient conditions. For use in different ambient conditions with high humidity, contact Solenoid Solutions. The coil is in conformity with 94/9 EC ATEX for electrical apparatus of group II, Category 3. All valve components are made from UL recognized materials.

Different electrical connections are available. All of the pneumatic connections are located on the valve body and all Solenoid Solutions 10mm and 15mm pilot valves are suitable for installation on sub-bases or in multi-valve manifolds with common inlet pressure and exhaust ports.

Technical Data

10mm

15mm

Valve Function

3/2 NC

3/2 NC-3/2 NO - 2/2 NC - 2/2 NO - 3/2 UNI

Media

air

air, dried or lubricated

Orifice Size

0.8 mm

0.8/11.1/1.5 mm

Pressure

0 115 PSIG

0 to 145 PSIG

Cv Flow Factor

0.23

0./0.32 to 0.64

Response Time

10 ms

5÷15 ms

Cycling Time

2400 cpm

2000 cpm

Lifetime Expectancy

50 million cycles

50 million cycles

Manual Override

monostable

monostable

Mounting

in any position

in any position

Fixing

N°2 screws M 1.6 x 14

N°2 screws M3 X 18

Coil technical data

Duty Cycle

ED 100%

ED 100%

Temperature

ambient -5°C to +50°C

ambient -10°C to +50°C

Power

1W

1 to 2.5W (DC) 3VA (AC)

Voltage

12-24V DC
(other voltages on request)

12-24 VDC 24-115-230 VAC
(other voltages on request)

Voltage Variation

±10%

±10%

Insulation Class

F

F

Degrees of Protection

IP 40 (according to EN 60529)
equivalent to NEMA 3

IP 65 (according to EN 60529)
equivalent to NEMA 4

Electrical Connection

connector

Amp 2.8 X 0.5 - DIN C - Flying leads - M12

Coil Construction

according to EN 60204.1 and VDE 0580

according to EN 60204.1 and VDE 0580

Materials

Valve Body

PBT (Polybutylene terephthalate)

PPS (Polyethaline sulfide)

Seals

HNBR (other materials on request)

NBR - FKM - FKM Low temp. (-40°)

Cores

Stainless Steel

Stainless Steel

Springs

Stainless Steel

Stainless Steel

Coil

PET (polyethylene terephthalatel)

Glass reinforced Polyamide 6.6

Copper Wire

Class H 180°C IEC 60317-51

Class H 200°C IEC 60317-13

Selection Chart

15-1 00-A 1 B
Part Number

Options

15
1
00
A
1
B
Product Family Seal Material Function & Specification Electrical Connection Electrical Voltage Options
10mm
15mm
1 - Buna
2 - Viton
3 - LT Viton
00
01
02
03
04
05
06
07
08
09
10
11
12
10mm
A = Axial w/ Connector
B = Axial w/o Connector
C = Perpendicular w/ Connector
D = Perpendicular w/o Connector
15mm
A = Industrial 9.4mm 3 pins
B = Din C 8.0mm 3 pins
C = Std. Flying Leads (105C)
D = HT Flying Leads (140C)
E = M12
1 = 12VDC (Turn & Lock)
2 = 24VDC
3 = 24VAC 50/60 Hz
4 = 11VAC 50/60 Hz
5 = 220VAC 50/60 Hz
6 = 230VAC 50/60 Hz
Manual Override
B = Bistable
N = No Override

Coil Orientation
S = Same as Ports

Other Options



Contact Factory
Base Models
Function and Specifications
Nominal Size Buna Product Family Viton Product Family LT Viton Product Family Function Orifice Port 1in./mm Orifice Port 3in./mm CV Factor Flow in CFM Port 1 to Port 2 at 87 PSIG Min. Pressure PSIG Max. Pressure PSIG Power Wattage Power VA
10mm
10-1 00 NA NA 2/2 NC 0.03/0.8 - 0.013 4.6 0 116 1 NA
15mm
15-1 00 15-2 00 15-3 00 2/2 NC 0.03/0.8 - 0.019 6.4 0 116 1 3
15-1 01 15-2 01 15-3 01 2/2 NC 0.04/1.1 - 0.028 9.9 0 145 2.5 3
15-1 02 15-2 02 15-3 02 2/2 NC 0.06-1.5 - 0.037 12.7 0 87 2.5 3
15-1 03 15-2 03 15-3 03 2/2 NO 0.04/1.0 - 0.027 9.2 0 145 1 3
15-1 04 15-2 04 15-3 04 2/2 NO 0.06/1.5 - 0.037 12.7 0 145 2.5 3
15-1 05 15-2 05 15-3 05 3/2 NC 0.03/0.8 0.04/1.0 0.019 6.4 0 116 1 3
15-1 06 15-2 06 15-3 06 3/2 NC 0.04/1.1 0.06/1.5 0.028 9.9 0 145 2.5 3
15-1 07 15-2 07 15-3 07 3/2 NC 0.06/1.5 0.06/1.5 0.037 12.7 0 87 2.5 3
15-1 08 15-2 08 15-3 08 3/2 NC 0.03/0.8 0.04/1.0 0.019 6.4 0 232 2.5 3
15-1 09 15-2 09 15-3 09 3/2 NC 0.04/1.1 0.06/1.5 0.028 9.9 29 109 1 3
15-1 10 15-2 10 15-3 10 3/2 NO 0.04/1.0 0.04/1.1 0.027 8.1 0 102 2.5 3
15-1 11 15-2 11 15-3 11 3/2 NO 0.06/1.5 0.06/1.5 0.025 12.7 0 51 2.5 3
15-1 12 15-2 12 15-3 12 3/2 UNI 0.03/0.8 0.04/1.0 0.067 6.4/8.1 29 145 2.5 3

SubMiniature Pilot Valve Connection Options

10mm SubMiniature Solenoid Valves and Flow Diagrams

10mm Perpendicular Connection

10mm Axial Connection


15mm SubMiniature Solenoid Valves and Flow Diagrams

15mm Amp 2.8 x 0.5

15mm DIN C

15mm Flying Leads

15mm M12

About Us

Solenoid Solutions works exclusively with OEMs to provide high-quality solenoid valves and multi valve manifolds in large volume.

Contact Info

Solenoid Solutions Inc.
Made in the USA
Made in the USA

Get in Touch