Wattmizer with Plastic Valve Bodies

For many applications, plastic valve bodies offer significant value over metal-based bodies. Designed specifically for Solenoid Solutions’ high-performance Wattimizer series solenoid valves, these plastic bodies are lightweight, corrosive resistant, offer a lower profile and use convenient push-to-connect fittings… all at a lower cost. These plastic bodies are CUL/CSA approved.

The valve bodies offer integral 1/4" OD tube "push-to-connect" port fittings and have a max psi rating of 150. These plastic bodies and manifolds are designed for medical, fluid power, automotive, gas, and more; and can be used in direct-acting and pilot applications.

The Wattmizer Series are highly efficient, miniature electric solenoid valves designed for use in compact areas requiring low power draw. These 2-Way and 3-Way solenoid valves are offered in a range of .65 to 9 Watts of continuous power, with operating pressure capacities of up to 150psi (85 bar).

Note: Plastic valve bodies are limited to low-pressure applications up to 150 psi.

Valve Series	Operation	Body Size	Port Sizes	Orifice
Wattmizer	2-Way, 3-Way Directional, Axial Flow	1” (25.4mm)	10-32 stop port and 1/4” body port	.025” to .125” (body .025” to .078” (Stop)