Zurn PES6000-20 Replacement Solenoid | OEM Part 2W13X-0099-00

The Genuine OEM Replacement for Zurn PES6000-20 Solenoids

Solenoid Solutions 2W13X-0099-00 6VDC Solenoid Valve for Zurn PESS6000-20Reliability for High-Security Environments In correctional facilities, equipment downtime isn't just an inconvenience—it’s a security risk. The 2W13X-0099-00 is the original equipment manufacturer (OEM) solenoid valve found inside the Zurn PES6000-20 assembly.

If your Zurn ZP6800 series "Piezo" flushing system is failing to actuate, the solenoid is often the culprit. Instead of replacing the entire valve body or a discontinued assembly, you can restore full functionality with this precision-engineered 6VDC valve.

Key Compatibility

This solenoid is specifically designed for use in Zurn’s line of concealed, electronic flushometers, including:

  • Zurn ZP6800 Series: Piston-type flush valves for penal/correctional use.

  • Zurn ZTR Series: 6VDC concealed sensor or push-button models.

  • Zurn ZESS Series: Electronic sensor systems for stainless steel fixtures.

Technical Specifications

  • Manufacturer Part: 2W13X-0099-00

  • Cross-Reference: Zurn PES6000-20

  • Operating Voltage: 6 VDC

  • System Type: Piston-style electronic flushometers

  • Installation: Concealed behind-the-wall (secure chase) applications

Solenoid Valve Construction & Specifications

  • Valve Type: "W" Series, 2-Way Normally Closed
  • Coil Type: Non-molded Class B (130°C) continuous rating with (2) #20 AWG x 18-inch long leads and grommet-style housing
  • Voltage: 6 VDC
  • Wattage: 3 Watts
  • Valve Materials:
    • Stainless steel body
    • Stainless steel wetted parts
  • Body Orifice: Ø0.055 inches
  • Seal Material: Buna-N
  • Maximum Operating Pressure Differential (M.O.P.D. ): 125 PSIG
  • Porting: 1/8-27 NPT Female

Maintenance Pro Tip: When replacing the solenoid, inspect the wiring to the Piezo push button and the battery pack/transformer connections to ensure the 6VDC signal is reaching the valve consistently.

Ordering Information

Part Number Technical Description Unit Price Action
2W13X-0099-00 Direct OEM Replacement for Zurn PESS6000-20. 6VDC, Piston-style actuation. $48.75 REQUEST QUOTE

* This solenoid is the genuine OEM component for Zurn ZP6800 series prison flushing systems.

Direct Manufacturer Replacement for Zurn PES6000-20


Bulk Ordering for Facilities
Do you manage a large correctional institution? We offer bulk fulfillment for the 2W13X-0099-00 to ensure your maintenance team always has the parts they need on hand.

Troubleshooting Your Zurn Electronic Flush Valve

Check the power source first. Ensure the 6VDC battery pack is fresh or the transformer is delivering consistent power. If power is present, listen for a "click" from the 2W13X-0099-00 solenoid. If you hear a click but no water flows, the solenoid plunger may be clogged with debris. If there is no click, the solenoid coil may have failed or the Piezo button wiring is damaged.

This is often caused by debris trapped in the solenoid seat or a ruptured diaphragm in the main Zurn valve body. Shut off the water supply and inspect the 2W13X-0099-00 valve orifice. Even a tiny grain of sand can prevent the solenoid from sealing, causing the toilet to run indefinitely.

In correctional settings, this is usually caused by a short in the Piezo button wiring or moisture in the electrical connections within the chase. Ensure all connections to the solenoid are dry and secure. If the solenoid is receiving "phantom" 6V pulses, the issue lies in the sensor/button module; if it stays open without a signal, the solenoid internal spring may be weakened.

A weak flush usually indicates a restriction. Check that the supply stop is fully open. If the water pressure is correct, the solenoid filter/screen (if installed in-line) may be partially blocked, preventing the valve from exhausting the pressure needed to fully lift the piston.